Settings for both clips:
Presence - 5
Bass - 1
Mids - 7
Treble - 4.5

Guitar : Agile AL-3000M les paul copy Alnico V PAF type pu's

On one clip, the PPIMV is set at 5 and on the other it is almost cranked, at 9 or 3:00 position. At this position, the output of the amp is closest to the output of a JTM45. Past this point, more power tube distortion can be achieved. I used the PPIMV at 9 to more closely emulate the output of a JTM45 or a plexi. See if you can guess which one is which. 

This comparison I hope will show how good the PPIMV is on this amp, and what you are really hearing when you get the power tubes cooking. The input mic volumes on the recordings were compensated to make the overall output volumes of the recording similar.

Avatar 45 3

Avatar 45 2

Avatar 45 Low Volume

Avatar 45 Clean Test

Starts off at 3 on the volume, then to 5, then 6-7, then full gain. The gain boost on volume 5, then back off the volume to 2-3. Back off on guitar volume at certain times to show it cleaning up. Enjoy the amp Lou!

JMP1 - C Test For Lou

demo of Avatar 18
using normal channel - volume and tone at 7
using Agile AL-3000M neck through les paul 
straight into the amp no pedals, no attenuator
1x12 jet city cab closed back. Scumback M75 speaker 25W

Avatar 18 demo

3 Different demos if you will.

1. Tone and Volume at 5
2. Tone and Volume at 7
3. Tone at 8 Volume at 7.5

Agile AL-3000M LP guitar.
Straight into amp, 1x12 jet city closed back cabinet, Scumback M75 speaker.
Raw recording no EQ.

eNJOY.

ac/dcpicker