The sequence starts with a cable connection to the clock output from the Steady State Fate Ultra Random module. This clock output was sent to an intellijel hub mult. From here the clock was sent to first to a 4ms RCD/QCD, Delptronics Trigger Man, and to the MakeNoise Rene. First output gates from 4ms RCD 4 divide output to the trigger input on the Braids module top row, running in "WLIN" mode. The second multi-output was sent to a 4ms QCD output green channel 4, set at a division trigger time of 16. This would trigger single notes on the "Elements" module, that begins at 1:42. The playback mode is running in "Secret Easter Egg Mode" :-) The selected note sequence from the QCV output from Rene. The final output from Elements was sent to the Eventide "Pitch" pedal using the "Crystalizer" algorithm.

Clouds - was processing recorded chunks from the drum percussion, kick used from the top row "Peaks" 808 kick drum synthesis model. Then a snare was created from the "grey" noise output from the SSF Quantum rainbow running through the right side of Streams to make a snare drum, which was running in envelope mode with shape position to the left, short decay. Then a third voice uses the blue noise output from the SSF quantum rainbow for hi-hats. Amplitude triggered/controlled by a HexVCA. The drum sequence was programmed from the Delptronics Triggerman, using all 8 patterns stringed together running in pattern play mode but being CV controlled by the S&H # 1 output from the SSF Ultra Random. Output for all voices was grouped and multiplied into two separate mixers. First three channels of the Intellijel Mutamix, which was then sent to output channel B. From there the summed mix was sent into the "left" side input of Clouds. Then triggered in time with the sequence by an 8th division trigger from the 4ms RCD. The freeze input in Clouds was triggered in time 7th divisions from the 4ms RCD, so that the chunks would process and record then playback in spurts of timed randomness. The mode was set in the pitch-shifter/time stretcher configuration, where the grains were spliced so that created interesting granular pitching repeats and percussive glitch effects, as the rhythmic beats played through. Focused ranges were selected for the "Density/Pitchshifter" and "Timestetcher/Texture" controls. These were being controlled by the S&H #2 output from the SSF Ultra Random. The 1/volt pitch input was controlled by the toggle A/B output from the SSF ultra random. The clean drum outputs were also sent to channels 5, 6, and 7 on the Blue Lantern "Mix 'Em Up" module.

Streams left side processing from the MakeNoise Mysteron output, which was being triggered by the 5th division output, for the metallic ripple delay like sounds, with the mutation knob set to counter-clockwise, low bit mode.
The "Shelves" module was processing the acid-like filter parts that get un-muted at 12 seconds. The sound source running into "Shelves" was the "Braids" module bottom row, running in "CSAW" mode. CV controlled by the CV output from the MakeNoise Rene sent to another intellijel hub mult. From here each CV output was sent to the "Frequency" inputs pink, green, and white jacks on "Shelves". The "Tides" high tide output modulation the CV controlling the top frequency input on "Shelves" Each filter knob was set so the incoming "CSAW" input was being processed like a formant filter effect.

Smooth Sub OSC bassline coming from the MakeNoise STO. This was being CV controlled by an intellijel ￼µScale (B) output. Playing back 8 notes while being triggered from the 2nd division trigger on the 4ms RCD. Triangle wave output from an Intellijel Dixie (synced) to the sequence controlling the input (1V/Oct). Second STO at 55 seconds, alternating high note triggers from the 1 channel output from the 4ms QCD 6th division output. The second STO output was sent to a MakeNoise Optomix for short quick plucks.

Clouds & Streams

Mechanical Disturbance

Apocalyptic Machines

Singularity

Link to the video of the patch, recorded in one take here: https://vimeo.com/136165676

download to the .wav file :-)

Patch Notes:

Harmonic patch using the new MakeNoise tELHARMONIC is a Multi-Voice, Multi-Algorithm synthesizer, and 4ms Spectral Multiband Resonator. The master clock is the Tiptop Circadian Rhythms. Clock output running into the Modcan Touch Sequencer. Channel output one running into one intellijel Dixie (V1) for the bassline. Dixie output running into a Mutable instruments Ripples filter (LP4), triangle waveform. Second channel output sequencing quantized 8 note sequence to the telharmonic oscillator, creating the first lead sequence in the patch (major scale set). One Mult output taken and sent to the Strymon BigSky reverb pedal to create the delicate swarm pads that rise in and out at the builds. Amplitude control of the slow rises via the intellijel HexVCA, slow rate control from one Modcan Quad LFO. The other output is then taken and sent to the Qu-bit RT-60 reverb. Third output from the Modcan TS sending quantized CV to the MakeNoise STO oscillator variable SHAPE output then sent through lower section of the MakeNoise Optomix. The forth output from the Modcan TS is sending a 4 chord pattern (min9) to the intellijel shapeshifter module in chord mode. This output is then sent to another Qu-Bit RT-60 reverb algorithm. MakeNoise Mysteron plucking guitar like effect being triggered by a 4ms RCD, 5th trigger out. The Mysterson then is running out into a Strymon BlueSky pedal, reverb.

Drum sequencing from TipTop CR, channel one kick drum going to the Nord Drum 2. Second channel number 2 triggering a custom snare drum made on the Nord Drum 2. Channel 6 from the CR triggering a low bass drum, in the key of "C". Clock output from CR into the 4ms SCM being rotated by a intellijel dixie sine wave output running at a slow rate shifting the 16th's hi hat pattern. Noise source for hi-hats are the SSF quantum rainbow 2, purple output running into the MakeNoise Optomix. The high end snare clap sound is by the Synthrotek's DS-M drum module, then being lightly processed by the Synthrotek DLY, slowly CV controlled by a Modcan Quad LFO in random mode creating more glitchy effects. This is then being sequenced by channel number 2 from the tiptop CR. The first lower left side 4ms Spectral Multi-band Resonator processing 72 custom DSP samples, which are being played by one addac wave player. The output is then being sent to a intellijel uVCF filter (hi pass), for the light subtle glitch textures. The second 4ms Spectral Multi-band Resonator, processing another set of 32 samples (noise washes/slow rises/falls) via channel number 4 from the CR tiptop. From here the output is being processed by a Mutable Instruments Clouds (granular mode), being controlled by the Pittsburgh Modular Game System running "Meteor Shower" mode in which the explosion based gates and random control voltages are then being sent to 3rd Dixie, controlling the CV rate time then from there its sent to the "Freeze" input on clouds, processing small bits of audio coming from the second addac waveplayer, The second output coming from the gamesystem is going into the "position" input on Clouds, which is doing some additional glitching to the signal.Main output from a intellijel Mutagen mixer then ran through the Eventide space pedal for extra spatial atmosphere. :-)

Apocalyptic Machines

Breath Of The Abyss

Related tracks