Lovely! And "Liquide" is the perfect title!

I really like the center section.  Really different Buchla sound.

First recording with the Ambient Recording Sound Fish ASF-1 MKII Hydrophone. The sounds you are hearing are of oxygen slowly leaking from chunks of colored sidewalk chalk.

Ambient Recording Sound Fish ASF-1 MKII Hydrophone.

ASF-1 MKII Hydrophone Underwater Recording of Sidewalk Chalk

The sequence starts with a cable connection to the clock output from the Steady State Fate Ultra Random module. This clock output was sent to an intellijel hub mult. From here the clock was sent to first to a 4ms RCD/QCD, Delptronics Trigger Man, and to the MakeNoise Rene. First output gates from 4ms RCD 4 divide output to the trigger input on the Braids module top row, running in "WLIN" mode. The second multi-output was sent to a 4ms QCD output green channel 4, set at a division trigger time of 16. This would trigger single notes on the "Elements" module, that begins at 1:42. The playback mode is running in "Secret Easter Egg Mode" :-) The selected note sequence from the QCV output from Rene. The final output from Elements was sent to the Eventide "Pitch" pedal using the "Crystalizer" algorithm.

Clouds - was processing recorded chunks from the drum percussion, kick used from the top row "Peaks" 808 kick drum synthesis model. Then a snare was created from the "grey" noise output from the SSF Quantum rainbow running through the right side of Streams to make a snare drum, which was running in envelope mode with shape position to the left, short decay. Then a third voice uses the blue noise output from the SSF quantum rainbow for hi-hats. Amplitude triggered/controlled by a HexVCA. The drum sequence was programmed from the Delptronics Triggerman, using all 8 patterns stringed together running in pattern play mode but being CV controlled by the S&H # 1 output from the SSF Ultra Random. Output for all voices was grouped and multiplied into two separate mixers. First three channels of the Intellijel Mutamix, which was then sent to output channel B. From there the summed mix was sent into the "left" side input of Clouds. Then triggered in time with the sequence by an 8th division trigger from the 4ms RCD. The freeze input in Clouds was triggered in time 7th divisions from the 4ms RCD, so that the chunks would process and record then playback in spurts of timed randomness. The mode was set in the pitch-shifter/time stretcher configuration, where the grains were spliced so that created interesting granular pitching repeats and percussive glitch effects, as the rhythmic beats played through. Focused ranges were selected for the "Density/Pitchshifter" and "Timestetcher/Texture" controls. These were being controlled by the S&H #2 output from the SSF Ultra Random. The 1/volt pitch input was controlled by the toggle A/B output from the SSF ultra random. The clean drum outputs were also sent to channels 5, 6, and 7 on the Blue Lantern "Mix 'Em Up" module.

Streams left side processing from the MakeNoise Mysteron output, which was being triggered by the 5th division output, for the metallic ripple delay like sounds, with the mutation knob set to counter-clockwise, low bit mode.
The "Shelves" module was processing the acid-like filter parts that get un-muted at 12 seconds. The sound source running into "Shelves" was the "Braids" module bottom row, running in "CSAW" mode. CV controlled by the CV output from the MakeNoise Rene sent to another intellijel hub mult. From here each CV output was sent to the "Frequency" inputs pink, green, and white jacks on "Shelves". The "Tides" high tide output modulation the CV controlling the top frequency input on "Shelves" Each filter knob was set so the incoming "CSAW" input was being processed like a formant filter effect.

Smooth Sub OSC bassline coming from the MakeNoise STO. This was being CV controlled by an intellijel ￼µScale (B) output. Playing back 8 notes while being triggered from the 2nd division trigger on the 4ms RCD. Triangle wave output from an Intellijel Dixie (synced) to the sequence controlling the input (1V/Oct). Second STO at 55 seconds, alternating high note triggers from the 1 channel output from the 4ms QCD 6th division output. The second STO output was sent to a MakeNoise Optomix for short quick plucks.

Clouds & Streams

Close range recording of Dubia Roaches with the DPA 4060 CORE Normal-Sensitivity Omni Lavalier Microphone x 2. Captured with the Sound Devices MixPre-10 II 24-bit/48khz.

Field Recording of Dubia Roaches

Close range recording of MealWorms with the DPA 4060 CORE Normal-Sensitivity Omni Lavalier Microphone x 2. Captured with the Sound Devices MixPre-10 II 24-bit/48khz.

Field Recording of a Live MealWorms

Stereo capture with two Ambient Recording Sound Fish ASF-1 MKII Hydrophones recording Pop Rocks Candy.

Pop Rocks Underwater Recording

Hydrophone PopRocks

I am very excited to announce I am releasing a new track called "Recursion Constructors". This piece was a commission for the University of Huddersfield. A 12-minute mind-bending Electroacoustic journey driven by a customized MakeNoise modular system and various objects, that utilized the FluCoMa toolset.

Link to the track on Bandcamp: https://richarddevine.bandcamp.com/track/recursion-constructors

Grab the free Max/MSP patches, samples, Morphagene Reels, and a detailed explanation of the making of "Recursion Constructors" in the link below: 
https://learn.flucoma.org/explore/devine/

Recursion Constructors

One track ,for the fun 227 test 
arp jupiter 4 
buchla 200r   ,227mix only tweaking ,208,258 morphing  ,230,296,,295,292,281,266,291 center sound

boop’s Enjoy!

LIQUIDE ...Arp buchla 227 morphing

buchlaventure

Recent comments

boops95

LIINT

Votek_Mendo

Weinglas

Related tracks