sampha1

sampha2

Il KIT permette di realizzare un pedale caratterizzato da un circuito pre-amplificatore che và a  simulare la sezione distorta di un famoso amplificatore utilizzato in ambito metal. Si caratterizza per n.5 controlli denominati BASS, MID, HIGH, VOLUME e GAIN e fornisce la possibilità di un line out (CAB SIM) tramite la quale uscita il pedale può essere collegato per esempio direttamente ad una scheda audio. Il suono dello Scream of Death è adatto al genere Metal.

Scream of death - 1

Scream of death - 3

Scream of death - 2

Replica KIT Muff Black Russian by DIY Pedal Gear Parts www.diypedalgearparts.com

Black Russian Replica - 4 (high gain)

Replica KIT Muff Civil War by DIY Pedal Gear Parts www.diypedalgearparts.com

Muff Civil War Replica - 4 (high gain)

Replica KIT Muff Green Russian by DIY Pedal Gear Parts www.diypedalgearparts.com

Green Russian Replica - 4 (high gain)

Replica KIT Muff Ram's Head by DIY Pedal Gear Parts www.diypedalgearparts.com

Ram's Head Replica - 4 (high gain)

Replica KIT Triangle'66 by DIY Pedal Gear Parts www.diypedalgearparts.com

Triangle'66 Replica - 4 (high gain)

Retro Delay REPLICA KIT - 1 Clean

Retro Delay REPLICA KIT - 2 - Distortion

Questo KIT permette la realizzazione di un pedale distorsore/overdrive basato su valvola 12AX7/12AU7, caratterizzato da 5 controlli: volume, gain, high, mid e low.

Old_Skull_2

Old_Skull_1

Old_Skull_3

The Sustain Wall KIT allows the creation of an analog pedal inspired by the sounds of David Gilmour. The Sustain Wall is based on a famous circuit created by a well-known manufacturer and provides a wide range of sounds, from the classic Fuzz Face (vintage) to Muff.

Sustain Wall DIY Pedal KIT

OverDISTO - 1

OverDISTO - 2

OverDISTO - 3

CHIRONE Overdrive is inspired by a famous overdrive circuit developed in the 90's. The CHIRONE features a "transparent" overdrive, which means it adds gain to the signal without significantly altering the tone of the guitar. A depending on the control knob settings, the pedal can act primarily as a clean boost, adding mostly volume and minimal coloring to the sound. The pedals feature 3 controls: drive, tone and volume plus 2 toggle switches that control clipping options (germanium / led) and bass / midbass mod.

https://www.diypedalgearparts.com/en/distortion-overdrive-and-fuzz/903-pedal-chirone-overdrive-replica-kit-8053323217602.html

chirone2

chirone1

KARAKA Analogue Chorus REPLICA pedal KIT

https://www.diypedalgearparts.com/en/compression-and-modulation/840-karaka-chorus-replica-pedal-kit-8053323218388.html?search_query=karaka&results=2

karaka_vib

karaka_norm

PCB Muff REPLICA (6 versions)

PCB size: 6cm x 4cm, high quality finiture dark green

This PCB allows to create n.6 types of Muff REPLICA: Ram's Head 73, Green Russian, Civil War, NYC, Triangle '66 and Black Russian.

Triangle

Ram's Head

Green Russian

Civil War

Black Russian

TRUE BYPASS) CVPS Analogue Flanger pedal REPLICA KIT (unassembled), composed by*:


Step-by-step assembly instructions in English

1 x Top Sticker CVPS Flanger
1 x Professional PCB
23 x Capacitor (electrolytic, greenies, ceramic disk)
43 x Resistor 1/4W
3 x Transistor 2N5088/2N5087 & 6 x IC LM311N, MN3007, TL072, LM324N, CD4013, CD4049
4 x Potentiometer B100K, B10K, C1M
4 x Knob 
1 x Aluminium box 1590BB (119x93.5x34mm)
1 x Jack out Mono 
1 x Jack in Stereo
1 x 3PDT footswitch latching true bypass
1 x DC Power Jack 
1 x LED 
1 x LED bezel
1 x Wire (1 mt)

*Type of Jack in/out, led, led bezel might change based on availability.

This KIT allows the realization of an Analogue Flanger pedal effect designed to emulate the sound of David Gilmour in "The Wall". It is characerized by per n.4 controls/knobs (VOLUME, FLDEPTH, CHDEPTH and WAVESPEED) and n.1 toggle switch which disables the flanger and enables a sort of manual control of the modulation through the knobs.

CVPS Flanger DIY Pedal

(TRUE BYPASS) Fuzz Fake Germanium REPLICA KIT (unassembled), composed by*:

Step-by-step assembly instructions in English
1 x Professional PCB
6 x Capacitor (electrolytic, greenies)
5 x Resistor 1/4W & trimpot
2 x Transistor AC128

1 x ICL7660SCPA
1 x Diode LED 3mm red
2 x Potentiometer A500K/A1K
2 x Knob 
1 x Aluminium box 1590B (114x64x30mm)
1 x Top Sticker Fuzz Fake
1 x Jack out Mono 
1 x Jack in Mono
1 x 3PDT footswitch latching true bypass
1 x DC Power Jack 
1 x LED 3mm 
1 x LED bezel 3mm 
1 x Wire (1 mt)

*Type of Jack in/out, led, led bezel and knobs might change based on availability.

The PCB has been designed to allow the implementation of the Silicon or Germanium version. This versatility allows the use of a standard +9V stabilized power supply. The regulation of the trimmer is based on personal preference.

Fuzz Fake GE Samples

Your partner creating unique guitar sounds!
Electronic components and KITs for your projects.
www.diypedalgearparts.com

DIY Pedal Gear Parts

Popular tracks