Heat Treat Radio host, Doug Glenn, and several other Heat Treat Today team members sit down with long-time industry expert Dan Herring, The Heat Treat Doctor® of the HERRING GROUP, to finish the conversation about mill processes and production. Enjoy this third informative Lunch & Learn with Heat Treat Today.

Watch | Listen | Learn
Full transcript, audio, and video to this episode is located here: https://heattreattoday.com/radio

Heat Treat Radio #80: Lunch & Learn with Heat Treat Today – Mill Processes and Production, Part 2

Where did the ±.1°F AMS2750 requirement come from and how should heat treaters approach this specification, an important change that entails major buy-in? Andrew Bassett, president and owner of Aerospace Testing and Pyrometry, was at the AMS2750F meeting and shares the inside scoop on this topic and what he expects for the future of this standard. Heat Treat Radio podcast host and Heat Treat Today publisher, Doug Glenn, has written a column on the topic, which you can find here ; read it to understand some of the background, questions, and concerns that cloud this issue.

Watch | Listen | Learn
Full transcript, audio, and video to this episode is located here: https://heattreattoday.com/radio

Heat Treat Radio #91: Understanding the ±.1°F Requirement in AMS2750, with Andrew Bassett

Today’s Heat Treat Radio episode illuminates how Gary Sharp, founder and CEO of Advanced Heat Treat Corp, began the company. Heat Treat Radio host and Heat Treat Today publisher, Doug Glenn, will hear from Gary about the technical highlights and capabilities of ion nitriding, including: common applications, real-world benefits, and true limitations.

Watch | Listen | Learn
Full transcript, audio, and video to this episode is located here: https://heattreattoday.com/radio

Heat Treat Radio #93: Why Ion Nitride? An Exploration with Gary Sharp

Metal Treating Institute CEO, Tom Morrison, talks with Heat Treat Today’s Doug Glenn about 2018’s largest heat treat event, Furnaces North America, which will be held in Indianapolis, Indiana, from October 8-10, 2018. Find out why manufacturers with in-house heat treat shops should not only attend FNA 2018, but why they should send the entire team to this once-every-two-year event. And when you come to the end of the podcast, click over to Heat Treat TV to see a recently released FNA 2018 promotional video that will whet your appetite for the event.

Heat Treat Radio #9: Why Manufacturers Should Send Their Entire Heat Treat Team to FNA 2018

If you’re a manufacturer and you use parts washers to remove oil residue from metal parts, or if you’re a commercial heat treater who washes parts, today’s Heat Treat Radio episode should be especially interesting to you. Why? If you thought there was nothing new in the parts washing arena, you’ll be shocked at what you’ll learn today. Let me whet your appetite. What if I told you there was a parts washing additive out there where you only had to add .3 ounces — that’s right, .3 ounces — to every gallon of wash water? And what if I told you that you could run that solution for 3 to 4 months without adding any chemicals? And what would you say if I told you that the oil skimmed off of your wash bath would have a lower water content than anything that you’re currently using? And what would you say if I told you your maintenance team would never have to check the concentrations of your wash water again? Not enough? Okay, let me give you one more. What if I told you that when you were done with the bath, you could just dump it down the drain?
Sounds too good to be true, right? Well, buckle up, because Heat Treat Today is going to take you where no heat treat washing system has ever gone before.

Heat Treat Radio #10: John Vanas on a Revolutionary Heat Treat Washing Solution

Heat Treat Today

Related tracks