I selected samples and loops which i thought would  suit the kind of sound that i was aiming for. Once i had put them in order, i then started to manipulate them with effects and panning until i was happy with the sound. I then started to edit the track removing certain parts to give the track cohesion and balance. 

I am happy with the track i achieved what i set out to do. I created what i was aiming for and thinking of sonicly. 

Next time i would choose different samples and loops. I tend to lean more towards the industrial side of music so this would be the way my choice of samples and loops would go.

I would make my own samples starting from scratch, mixing  them in with synth patches and drum sounds from my drum machine.

My inspiration for this track came from Moby Go. https://www.youtube.com/watch?v=p7Sl0wMz95w 

 and Gary Numan's track Listen to my voice.
https://www.youtube.com/watch?v=l8YjVw_2Lok



Karl Bavin Noise CP Track

on this track i used a stab sample, it is uneffected. i found that it worked very well in the track as it was.
i would use this sample again on another project as it is a good starting point. i did mix it up with some effects but decided to leave it as it is.
i am happy with the result my experiment worked well and i achieved what i set out to do.

FX 2 Experiment

this is the same bass sample as used on the other two tracks . on this track i added no effects at all just kept clean sitting just above the other two bass samples. I did this so it would blend well with the other basses and I could see when putting this in the track I could switch between the different bass sounds to add interest for the listener. It is a good sample and a good starting point.
i am happy with the way it turned out.
I achieved what i set out to do.

FX Bass 1 Experiment

I used the same sample as on the first track. this time I used a compressor dynamic tube and a vocoder. This was done to completely change the sound and when layered with the other basses it would give something totally new and creative sounding instead of just dropping the sample in as is. I messed about with controls on the efx units until iIachieved  the result I was looking for.
I would use this sample again as it was a good starting point.


FX Bass 2 Experiment

i used a bass loop. i added dynamic tube vinyl distortion and flanger.
i wanted to sound distorted and un natural. This is because I wanted it to sound a lot more electronic and industrial and playing this against the drums would gave a dynamic contrast that I wanted. I achieved what i set out to do.
I would probably use this sample again.
I am happy with the end result. 

FX Bass 3 Experiment

on this i used the same pad sample but left it clean. centered it in the L/R mix.
I used no effects as it was just as i wanted it too sound. I left this sample dry as it has the big analog sound to it. I wanted this sound because I felt it would lift the track. It would give the music a bit of direction by focusing the listeners attention. This sound also fit well with the rest of the experiments I created.

FX Experiment

in this experiment i used a pad sample i put vinyl distortion on it and panned it left and right.
i liked this sample it was just what i was looking for. It has a good analog synth sound and feel to it.
I was wanting to give the sound and the track a different tonal quality, mixing up the same sound to create something different. I am happy with the result. I used the same sample three times. Dry in the middle with the effected ones panned left and right. Adding the vinyl distortion to the left and right gave the sound a bit more width in the stereo field which would add more atmosphere and depth to the music.

Noisy Pad Experiment

i used the same stab delay
i panned it added delay distortion and Flanger. it was a good starting point i would probably use this sample loop again.
with this sample i was going for a different  tonal effect than i used on the other i am happy with my experiment on this sample.
This was a successful experiment because using the same sample and adding different effects it gave me a different tonal quality that I was looking for. Again this experiment was created as something to add space and ambiance to a track. I have used this in my final piece. I used the distortion and flanger to completely change the sound of the sample. Having both together has created some interesting tonalities. 



Stab Delay 2 Pan Experiment

Here i used a stab sample,
I added Auto pan and overdrive.
It was what i was looking for and once
this stab sample  had been effected i created  the desired effect i was looking for.
My experiment was successful
I would probably use this sample again.
I used auto pan because I wanted to have the affect of the sound bounce left and right and increasing the stereo image. I was able to achieve this easily with this effect rather than manually doing it as this would have taken a lot longer for the same result. 
I specifically created this experiment to add possible atmosphere and aural stimulation to a piece of music I would put it in. I included it in the final piece.
For the purpose of the final piece this sample suited what I was looking for. But for another track I would create my own samples with similar effects to see what I could create differently.


Stab Delay Experiment

I used Glitch hop drum loop.
I added Simple Delay and Overdrive.
This sample loop has a good rhythm, it is very electronic in feel in future i would create my own by using a drum machine or drum programm of some sort.
My aim was to dirty the drums up. 
I achieved in making it dirty and distorted. I was trying to turn a hip hop/Glitch drum loop into something more industrial sounding. I achieved what i set out to do.