EQ setting - 'moving the mic away'
heyho,

here a EQ setting that mimics what happens when you increase the distance between the mic and the speaker.
it's an idealized version, of course, but I found it helpful on quite a few rigs.

the main ingredient is the cut at around 4k:
Mid2 Gain -6,4 dB
Mid2 Freq 3974.8 Hz
Mid2 Q 1.740

I also boost the low end:
Mid1 Gain +6 dB
Mid1 Freq 100.4 Hz
Mid1 Q 1.440

start with mix at 0%, turn it up to 100% to hear what it does, then find your sweetspot, I often land at around 50%

EQ setting 'moving the mic away'

Mago + 6505+ Red3 profile raw & with EQ

demo #1 of the upcoming MW Rig Pack
guitar: Michael Elsner

MW MTS Mandarine KPA

two examples of stacking distortion stomps

example 1 - lower dist stomps:
1a just the breaking up amp profile
1b + the first GS stomp
1c + the second GS stomp

example 2 - more distortion from the stomps
gain-wise the example is in reverse:
2a the breaking up amp profile with two GS stomps
2b just one  GS stomp
2c just the breaking up amp profile

Distortion Stacking 01 - 2 Green Screams

demo of the Splawn Quick Rod profile
3rd gear
Wizard cabinet
4x12 25W Greenbacks
R-121/R-101

MW Splawn Quickr KPA

short demo of the ramp time of the Profiler's Rotary Speaker effect. The rig used is 'CK Rotary Speaker' with the Mouse stomp in front to add some dirt.

Rotary Slow - Fast - Slow

Rig: Fischers Sold 100/3
first just the rig, then the rig with a Maxon OD808 in front.
Settings on the OD808: Overdrive: 7 o'clock (min) , Tone 7 o'clock (min), Balance: 12 o'clock

Sold - Sold with OD808

Rig: Fischers Sold 100/3
first just the rig, then the rig with Green Scream.
Settings on the Green Scream: Drive: 0,0 (min) , Tone -5,0 (min), Volume:0,0 (12 o'clock)

KemperProfilingAmplifier

Popular tracks