One Synth Challenge #150: TAL-NoiseMaker

I tried to mix the classic EDM genre Acid with Dubstep and hope it works ;)

My submission for KVR's OSC 150, TAL NoiseMaker as only sound source.

DAW: Zrythm alpha22.1.11-29 https://www.zrythm.org/

25x TAL NoiseMaker https://tal-software.com/products/tal-noisemaker

Additional Effects:
-LSP Sidechain Compressor https://lsp-plug.in/
-Filta by openAV-ArtyFX https://github.com/openAVproductions
-Dragonfly Hall Reverb https://michaelwillis.github.io/dragonfly-reverb/
-ZaMultiCompX2 http://www.zamaudio.com/
-ZamCompX2

Master Bus:
-LSP Parametric EQ (Stereo and MidSide)
-ZaMultiCompX2
-airwindows ADClip7 https://www.airwindows.com/
-x42 Digital Stereo Limiter https://x42-plugins.com/x42/

MyLoFy - TALisman

This is my entry for KVR OSC 150.
Much of the midi (for the drums, most of the bass lines, and the sparkly things) was generated in VCV Rack, routed into Reaper via loopMIDI, and edited a bit.
All sounds are TAL Noisemaker. 
The FX used were: 
Pancake, 
SonEQ, 
Slick EQ, 
Loudmax, 
NastyDLA, 
Ferric TDS, and 
DC1A3.

Probabilities

KVR OSC 150 - One Synth Challenge
51 instances of TAL NoiseMaker

The One Synth Challenge is a monthly competition at KVR audio forum.  Every month a synth is chosen, you may use only that synth to compose a song.  You may use free and stock FX, but for mixing purposes and not to drastically alter the sound of the synth, or do sound design that you can't do with the synth alone.

VOID

My entry for the KVR One Synth Challenge #150.
Make with 13 instances of TAL Noisemaker in Bitwig Studio 4

OSC150 - TAL Noizemaker

Grubby Dub

About 30 instances of TAL Noizemaker in Reason.

OnTrack P OSC 150 Search For TALent

This is my entry for the One Synth Challenge 150 (Synthesizer: TAL-NoiseMaker made by TAL Software GmbH).

DAW: Reaper 6.34
31x TAL-NoiseMaker

FX:
- 1x 1175 Compressor (JS)
- 1x AutoPan (Airwindows)
- 2x BitShiftGain (Airwindows)
- 1x Capacitor (Airwindows)
- 2x Channel9 (Airwindows)
- 2x CStrip (Airwindows)
- 1x Galactic (Airwindows)
- 1x Highpass2 (Airwindows)
- 1x Infrasonic (Airwindows)
- 3x Interstage (Airwindows)
- 1x MIDI Transpose Notes (JS)
- 1x MSaturator (MeldaProduction)
- 2x MSED (Voxengo)
- 3x OTT (Xfer Records)
- 1x Ping Pong Pan (JS)
- 6x PurestGain (Airwindows)
- 16x ReaEQ (Cockos)
- 2x ReaGate (Cockos)
- 1x Reverb (Airwindows)
- 4x Saturation (JS)
- 12x Slew3 (Airwindows)
- 3x Sound Delay (Voxengo)
- 1x TDR Kotelnikov (Tokyo Dawn Labs)
- 1x TDR Molotok (Tokyo Dawn Labs)
- 2x TDR Nova (Tokyo Dawn Labs)
- 14x TDR VOS SlickEQ (Tokyo Dawn Labs)
- 1x Tempo Delay (Voxengo)
- 2x Ultrasonic (Airwindows)
- 1x Waveshaping Distortion (JS)
- 1x XBandpass (Airwindows)
- 1x XLowpass (Airwindows)

Another Unstable Crystal

Created for the One-Synth-Challenge 150

Made with 53 Instances of TAL Noisemaker in FL Studio 20: 
https://tal-software.com/products/tal-noisemaker

FX (DAW)
Fruity Parametric EQ2, Fruity Stereo Enhancer, Fruity Delay 2, Fruity Delay 3, Fruity Limiter, Fruity Reeverb 2, Fruity Convolver, Maximus

FX (3rd Party)
Xfer OTT, Youlean Loudness Meter 2, TAL Reverb 2, TAL Reverb 4, MeldaProduction MSaturator, Analog Obsession Lovend, Analog Obsession Sweet Drums 	 

Sometimes mixed, other times mastered.

Impedance Music - Entering The Simulation (OSC#150 - TAL Noisemaker)

Another foray into one synth territory - an old, but excellent choice: TAL Noizemaker.

Man Down

This track made for the KVR One Synth Challenge #150 using only sounds made by the VSTi TAL Noisemaker plus DAW FX and free 3rd party FX

DAW Reaper

Track details
60 * TAL Noisemaker
ReaEQ
OTT
TAL Dub Delay
TAL Filter 2
Twin Delay
Oril River
Bass Professor Mark II
STFU

Master
TDR VOS SlickEQ
Ferric TDS
MSED
Limiter No. 6

Meter
SPAN
Youlean Loudness Meter 2

Stats: -12.3 LUFS
DR: 9

Enjoy

DoctorBob - Noize for the Road - OSC #150 TAL Noizemaker

Stunning Soap

Could be a Synth-Pop Burlesque?
12 TAL-NoiseMaker used for the One Synth Challeng OSC 150

OSC 150

ThousAnd_notEs_4_minutes (Synth-Pop Burlesque)

My submission for OSC #150.

DAW: Reaper
Plugins:
- NoiseMaker x25
- OrilRiver x1
- [Stock] ReaComp x4
- [Stock] ReaEQ x3
- [Stock] Master Limiter x1

Ethereal Geode

Song made using only sounds from TAL Noisemaker for the KVR One Synth Challenge #150

TAL Noisemaker x 14

Daw: Cubase Elements 11

Stock Cubase Effects:
Reverb, Stereo Delay, Compressor, Brickwall Limiter, Maximizer

3rd Party Plugins:
Youlean Loudness Meter 2 Free, Voxengo SPAN, Voxengo MSED, TDR Nova free, TDR Kotelnikov free, Auburn Sounds Couture Free, Abletunes Drive Knob, IVGI2

HorizonTAL

MiJoFranDa - HorizonTAL - OSC150

Hi everyone! Here is my Osc 150 TAL Noisemaker challenge track. Any comments are welcome.

There is TAL Noisemaker 31 tracks.

My DAW is Cubase 11 Pro

Daw effects here is:Vintage compressor, Standard Eq, Multiband compressor, Imager, Maximizer, Brickwall Limiter

3rd parties effect: Valhalla Supermassive reverb

Behind Mystic Curtains - JKFlashico

Made for One Synth Challenge #150 (https://sites.google.com/site/kvrosc/)
Synth: TAL-Noisemaker

OSC150 - Things To Do

Oh my god !  It put me on hold again.           Mmm, wha'd you say, honey ?
It put me on hold. AGAIN !'                           Mmm... 
But wait...oooh...they're playing really cool music now...I'll hold !

A submission for One Synth Challenge 150, brought to you through Switch Bitch 21, the latest advance in telecom by Fairly Light Electronics LLC. This product is fully OSC21150 compliant. 


Technical details below

Made in REAPER using:
TAL NoiseMaker 23 ( perc, 12 ; instruments, 11 -  for 8 voice-split instruments )
TDR Nova  23   (  tracks, 20 ; buses, 3 ; doing light household work only )    
TAL-DUB II  ( track,1 )
BlueARP ( 3 )
U-he Protoverb ( reverb bus, 2 ; master, 2 )
M/S encoder ( master, 1 )
Mixer ( master, 1 )
Oril River  ( reverb buses , 5x2 ) +  tracks (2)
HOFA System Pan ( reverb buses, 8x2 ) 
Valhalla Supermassive ( as  reverb ; bus, 2 )
A1 stereo control ( reverb buses, 3 )  + (  master, 1 )
Limiter No6  ( master, 1 )

ELEX - Please Hold...

Made for the KVR One Synth Challenge 150, where you have to use a single, very limited, freeware synthesizer for every single sound (including drums) in a song. We also can only use freeware effects, so I wasn't able to use my favorite production tools. For 150 we used NoiseMaker from TAL. I had to use 33 separate instances of the synth in order to get all these sounds.

Timedog - Choosy Moms Choose Timedog

Choosy Moms Choose Timedog

My submission for KVR OSC#150 (TAL Noisemaker)

14 instances of TAL Noisemaker

DAW: Reaper 6.35

Inserts:
Dead Duck  - DD Limiter
Cockos - ReaEQ
Ingite Amps- PTEq-X
Sonic Anomaly - Transpire
JonVProd - FirComp

Sends:
Dead Duck - DD Reverb, DD Delay, DD Gate, DD Limiter
Airwindows - Wider

Master:
Audio Tools - ADHD Leveling Tool
Tokyo Dawn - TDR Nova
Thomas Mundt - LoudMax
Youlean - Loudness Meter

KVR OSC#150 TAL Noisemaker

SeBaer - Hybris (OSC#150 - TAL-Noisemaker)

OSC #150

11 instances of Noizemaker
9 Bitwig EQ2
4 Dragonfly Hall
3 Kotelnikov
3 STFU

+ kotelnikov, gsatplus, loudmax, on the master.

Spring Goose - Noizekiller

OSC150davetbass

Join the challenge by going here: https://shorturl.at/bhBFQ