Demos for the neutron sound Dust of time eurorack synthesizer module. sounds by Jakplugg and guests.

Dust of Time Stereo Oscillator

There are 2 tracks of DoT the bass thing and the clicky noise thing, also drums from VPME.DE QD, and Michigan synth works SY0.5 through a monsoon.

The bass sound patch was OA Fix through LPoppo filter. 
The tingy thing was noise > toad also through LPoppo  (LPoppo is an oscillator mode that filters the other oscillator)

sequenced by cirklon. + manual control input.

Time2dust

I have re-worked the resonator FX, if you have patches made with the old resonator, they will not sound the same.

both oscillators you hear are playing at the same time, i am just moving the scan knob during the recording.
and some others!

major component is the resonators emulating Karplus–Strong synthesis (maybe it actually is?) 

the 2 oscillators are: waveEdit 2GR factory22
and Noise LP 

other modules:
drums are from VPME.DE QD
a little delay on DoT sometimes from 4MS DLD
everything sequenced by Cirklon in 1 go.

New Resonator 098B

Another DoT demo. 
osc1: basic sin bass through sinoid wavefolder FX 
osc2: swarm detune no FX, then the scan control was modulated by the external Cirklon sequencer.

i was adjusting the main envelope hold and decay throughout the recording.

Drum sounds: VPME.DE QD 
borking tom thing: Michigan synth works SY 0.5 through clouds(diy monsoon)

when this firmware comes out ill add this patch.

DoT WOOZLE__ patch

Demonstration of the Dust of Time Module - Neutron Sound. 
some new features around the release of 0.9.8C firmware.

Another demonstration of the resonator and lots of remoldulation!. It may be a crime against humanity!

This time It is using all 3 resonators, the CPU load was at 80% and only 15 FPS!

osc 1 was OA FIX 2.
osc 2 was Swarm Detune.
This is just a repeating 4 bar loop with no other control from the sequencer. all changes in sound were by adjusting the module and CV inputs.

Both oscs had their resonators length (pitch) modulated by a Fuser,
LFO with BPM turned on, resetting on each note was modulated by a CV input with a manual slider. 
the amount of glide was different on both oscs, and also amount of glide was modulated by CV in with slider.

Recorded in one take, drums were VPME.DE QD. delay is 4MS DLD. manual external CV provided by Michigan Synth Works XVI

Sorry for the noise, I forgot to turn off the LEDs on my keyboard and they make that noise. if it don't!

DoT Booper 098C

This is a new oscillator. It is given a limited number of points to work from and interpolates the "in between" samples. I have called it Band Limited X Y oscillator for now (BLiXY) 

This is 1 track of DoT sequenced by Cirklon, with VPME.DE QD drums and 4MS DLD. (counts as 3 module challenge, right?)

Both oscillators are set to BLiXY and i step through some of the wave data selections. the time and space parameters of each one are modulated by BPM synced LFOs and envelopes. (plus manual wiggling)

No internal or external filters were used at all, only a delay.

BLiXY_01

DoT demo of new stuff for 0.9.9 firmware.

There is a new swarm oscilator called logic 1. instead of adding the 8 saw waves together, like in "SWARM" it preforms some bitwise logic on them.

Then there is a new way to mix the 2 oscillators with the scan pot. instead of a crossfade, it performes "ANTI-AM" which is like AM, but oscillator 2 is only allowed to exist when oscillator 1 is NOT there. it is asymmetrical, the same 2 oscillator modes will not sound the same in Sin  <scan > noise,
and 
noise <scan> Sin

In this recording the osc1 was the new logic1 osc, and osc2 was good old "basic Sin" All the knobs were adjusted throughout, but there was only an envelope controlling the scan sometimes. the scan was set to new -AM mode. (Anti -AM).

There are no effects at all on the DoT, not even it's own. that tubular echo sounding thing is what the anti-AM can do with osc1 set to a swarm osc.

Thanks for listening.

DoT Logic - Anti-AM

2 new effects. there is the "phaser", it is on the global FX, so you hear it on both oscillators.

And, on oscillator 2, which is the swarm-detune, there is the "crossover distortion" 

Oscillator 1 is noise-LP

"Performance": hold down a key and turn some knobs. 

output is through a 4MS DLD stereo delay.

D-o-T 2-fex

Neutron Sound Dust of time Synthesizer module 0.99B firmware sound example.

The new delay non-oscillator, with the new phaser FX in feedback.
fed by OA 3X with wave modulated by chaos. 
When it stops that's when I let go of the key, not a dropout!.

One take, no external effects.

Tweedle

)))STEREO(((
not mixed for mono.
Dust of Time stereo oscillator x3,
2 of them have delay (4MS DLD).
Sequenced on Cirklon.
No additional drums or other sounds.

DoT 3x Stereo DeFex_Chill

All the sounds, Including "drum" sounds are Dust of Time module, one track has reverb added in mixing.

sequenced on Cirklon, which was synchronized to DAW with innerclock sync lock.

DoT 6 x Multitrack

The first demo of the Neutron Sound Brainstorm module.

This is a demo of the p-box. A p-box is a container that controls group of frags arranged as a "voice". whatever is routed between frags on the voice will be copied to the other voices.

All that is playing here Is drums from VPME.DE QD and Brainstorm poly sample player with 8 voices and 4 frags, sample player, envelope, filter, and output VCA. later on I turned on a delay (4MS DLD). the sample is a common fairlight sample called "FlangeGuitC3" I adjust filter cutoff, A,D,S,R and turn sequencer tracks on and off manually.

This patch uses about 7000/14000 available CPU cycles per sample.

This recording is a bit bad, sorry. its mostly because sampler interpolation was off.

Brainstorm demo 1: Poly Sample FlangeguitC3

DeFeX Spaceacid

Messing about with the new mode. One orgone accumulator recorded through a delay.

Orgone accumulator - playing with new AM-Xmode

This is "oxygenopia" but before it was reimagined for the initial upload at mp3.com

Complete record               

Oxygenopia premix (Original Defex-chill)

                              

Out of it #1

War21

That time sometime around 1999 when my friend and co "worker" Olitech found my samples folder and made a tune.

No work today

One track of The Michigan synth works MSW-810 monosynth. There is some added delay (Sonic Core scope ducking delay) and some drums (VPME.DE QD and MiSW SY0.5) its a repetitive track but the synth settings are adjusted throughout. Sequenced by Sequentix Cirklon.

MiSW 810 demo 1 - JM

It's an old one from somewhere around 2000 when i worked at gametronics. Nick was the Aussie.

Aussie style

this track is made entirely using the orgone accumulator. there are some effects and compression etc. but the orgone is the only sound (including drums)

OA TRAX(2)

A quick demo of the "delay" effect on the orgone accumulator.

This version has the delay time modulateable with control voltage. the am/fm frequency is moved to the mod waveform knob and the waveform is kept on sine.

there can be distortion at extremes in in this mode, but i will leave it in rather than nerf the sound too much.

Orgone delay 2.0 beta5

here is a track using the chord mode from orgone firmware  2.0.

filtering and reverb are added to the orgone accumulator sound.

Orgone Chords by "Unknown Cause"

all these sounds recorded direct from a single orgone accumulator with only an envelope, LFO,  and VCA

orgone accumulator trax 3

quote from the artist:

Someone`s been accumulating and re-orgone-izing  :banana: 

I just finished 3 more OA`s, unfortunately I can`t find the cable to charge my phone so don`t have a pic at the moment, but here is a patch I just set up:

3 OA`s (each in chord mode, layered) make up the pad, that is filtered through L-1 vactrol filter. The fourth OA is responsible for all the drums except the tonal high-hat noise-wash that is the Minibrute. All is being clocked by MI Grids and sent to envelopes that are modulating all four of the OA`s and also a vca that sends the chord to a Roland RE-301 with modified reverb tank (that goes back into the synth). All mixed in the L-1 Stereo-Mixer, and recorded through a pair of 1084`s.

I am basically modulating the feedback of the echo and manipulating Grids, and ofcourse all the variations of the orgone-drums are done by "hand". Showcases alot of colors! No other effects of post editing is done, this is straight from the synth  :sb: 

Chord and drum effect, 4 orgone modules! - Fragletrollet

another multitrack of orgone. this one has a little studio one room reverb and beat delay on a couple of the tracks.

Orgone trax 4

Filter modulated with envelope in the normal way.
various combinations of settings.

single saw oscillator sequenced.

Neutron Duofonik filter demo2

here are some faster notes, also in stereo (stereo location od each note picked random). one osc is "sine folded sine" with the amount of fold modulated and the other is "braids WMAP" again

Poly synth Blippitybloop

Some stereo drones, all self modulated with no CV input or knob tweaking. no effects. "stereo oscillator" is probably not the final name!

Stereo oscillator demo: some drones

1 note Drone made with Neutron Sound Dust of Time stereo oscillator in to Typhoon, no effects apart from the reverb on typhoon. Typhoon is modulated with one of the aux outs on Dust of Time, set to a chaos attractor. Osc1 is "harmonic" and osc 2 is "FM"

NDOT Drone

Dust of Time drones 2. now the Left and right side of each oscillator can be separately modulated, and the maximum and minimum for each side can be entered in cents, semitones or octaves. the pitch is modulated slowly with a maximum length decay to demonstrate (and with some other modulation by LFOs and chaos attractors thrown in) sorry about some clicks, they did not come from the module!

Dust of Time drones 2

I did a sort of acid like thing for a change instead of drones. One oscillator is playing FM and the other is playing orgone "fix" through a distortion filter effect. the amount of "filter" envelope is modulated by the spare pot via one of the fusers. There are some clicks near the start, its not the module, i think i need to change my DAW record settings.

Dust of Time Acid thing

Here is a patch I made after adding exponential VCA option on the Dust of time firmware. It is just one patch "perc-002", playing from a sequence, and I am manually turning the knobs.

Dust of Time Perc-002 patch

This is a little multitrack with all dust of time sounds, no effects except a delay on the "sequencer" track.

Dust of Time multitrack

If you listen with headphones, or at least in front of stereo speakers, you will hear the "Haas stereo transform" which is one of the ways the 2 channels of the Dust of time oscillator can be separated. It is a repeating sequence (on Michigan synth works chronovore 303 sequencer) the second gate of DoT is controlled by accent. The DoT is playing through a delay effect (E520) so you can hear the stereo Haas effect comes through even a long repeating delay. 

The Osc patch on the Dot, is Swarm and a waveEdit file, each side has a dynamic/distortion effect with the amount modulated by the "accent" gated envelope.

Dust of Time Haas Stereo transform

I don't even remember doing this, if it was entered, or if i am allowed to share it!

Neutron7

Pinned to spotlight

Popular tracks