More on this 232nd weekly Disquiet Junto project — “Record a piece of music exploring the concept of ‘no-input mixing.'” — at:

http://disquiet.com/0232/

More on the Disquiet Junto at:

http://disquiet.com/junto/

Join the Disquiet Junto at:

http://soundcloud.com/groups/disquiet-junto/

Subscribe to project announcements here:

http://tinyletter.com/disquiet-junto/

Disquiet Junto general discussion takes place at:

http://disquiet.com/forums/

Image associated with this project is by Andy Piper and it is used thanks to a Creative Commons license:

https://flic.kr/p/5N7TPV

Disquiet Junto Project 0232: No Input

project dirigent selections

Well I did not have 2 mixers but I have noticed how my headphones feedback when I lay them on the mic going throughout my stomp box interface so I went with that. I noticed that those fx on the box made different sounds and I noticed an fx when I messed around with the eq on the mixer(cool) so I did that and switched presets fx on the stomp box. I recorded all that. Pitched them down cause that high sound gives me a headache after awhile. I converted one track to midi and feed through a modular bass drum sound. I could not listen to much of this but I could see how a bit might be cleansing.
More on this 232nd weekly Disquiet Junto project — “Record a piece of music exploring the concept of ‘no-input mixing.'” — at:

http://disquiet.com/0232/

More on the Disquiet Junto at:

http://disquiet.com/junto/

Join the Disquiet Junto at:

http://soundcloud.com/groups/disquiet-junto/

Subscribe to project announcements here:

http://tinyletter.com/disquiet-junto/

Disquiet Junto general discussion takes place at:

http://disquiet.com/forums/

Image associated with this project is by Andy Piper and it is used thanks to a Creative Commons license:

https://flic.kr/p/5N7TPV


And How Do You Feel About That? (disquiet0232)

This week's Disquiet Junto involves creating a track using the 'zero-input mixer' method - which means that no overt sound sources are allowed - the noises are created using feedback loops form the mixer and any effects that are applied to the loops. 

I have done some ZIM work  before (https://soundcloud.com/ikjoyce/zero-input-mixer), so know just how important it is to be careful with levels! You have to really be ready with the kill switch / faders when feedback ramps up! It is usually advised to add a hard limiter to the end of the chain to prevent massive volume spikes. 

I did mine in my modular - using an A-138-m matrix mixer - this allows me to route four inputs into four outputs in various levels. It also allows me to send the signals either right-way up or inverted, which can help tame the feedback a little by letting me add in the inverted signal to the chain. I ran the loops through a few filters, a BBD delay module, and a Springray reverb unit (on large tank). The output went via a filter to the mixer, and had a large reverb added courtesy of the Strymon BigSky.  I then recorded as I played around with the various mixer knobs, filter cut-offs , tone controls on the springray, and delay length on the BBD.   The resonance controls on the filters was was turned down to avoid putting the filters in self-oscillation, which would have been contrary to the idea of a ZIM I feel!

A related idea is to use no patch cables between modules- just to play with the self-oscillations that can be created in individual modules:  -  and also a similar concept of using no patch cables: https://soundcloud.com/ikjoyce/self-oscilation 

Zero Input Mixer - (Disquiet0232)

https://hearthis.at/sevenism/crimson-sky-disquiet0232/ (full piece)

i do a lot of this. gave myself some extra constraints.. didnt use a noise gate or any limiting so if it went mental i'd have to deal with it on the fly. i wanted to get it so there was a complicated rhythm, bass, and mid/hi melody. recorded first go, came out ok.

all done in podfarm.. synth mods, wah, delays, reverb etc .. 20 modules across two fx chains

maglmmagkamgdkfadmsgdvblmbfbl;s,;s,bldf';.s'dFB:d.b';db#

Disquiet Junto Project 0232: No Input
The Assignment: Record a piece of music exploring the concept of “no-input mixing.”

This week’s project explores the concept of no-input mixing. For background, including a tutorial, this Synthtopia article, summarizing more detailed coverage by the Department of Performance Studies at Texas A&M, might prove useful:

http://www.synthtopia.com/content/2014/10/27/no-input-mixing-tutorial/

Step 1: Read up, if it’s not already familiar, on the concept of “no-input mixing,” which involves creating feedback by taking the output of a mixer and plugging it into the input of the same mixer, thus exposing and building on inherent (i.e., noisy) sonic properties of the device.

Step 2: Experiment with no-input mixing.

Step 3: Record a short piece of no-input mixing music.

Step 4: Upload your completed track to the Disquiet Junto group on SoundCloud.

Step 5: Annotate your track with a brief explanation of your approach and process.

Step 6: Then listen to and comment on tracks uploaded by your fellow Disquiet Junto participants.

Deadline: This project was posted in the afternoon, California time, on Thursday, June 9, 2016, with a deadline of 11:59pm wherever you are on Monday, June 13, 2016.

Length: Length is up to you, though between two and three minutes seems about right.

Upload: Please when posting your track on SoundCloud, only upload one track for this project, and be sure to include a description of your process in planning, composing, and recording it. This description is an essential element of the communicative process inherent in the Disquiet Junto. Photos, video, and lists of equipment are always appreciated.

Title/Tag: When adding your track to the Disquiet Junto group on Soundcloud.com, please in the title to your track include the term “disquiet0232.” Also use “disquiet0232” as a tag for your track.

Download: It is preferable that your track is set as downloadable, and that it allows for attributed remixing (i.e., a Creative Commons license permitting non-commercial sharing with attribution).

Linking: When posting the track, please be sure to include this information:

More on this 232nd weekly Disquiet Junto project — “Record a piece of music exploring the concept of ‘no-input mixing.'” — at:

http://disquiet.com/0232/

More on the Disquiet Junto at:

http://disquiet.com/junto/

Join the Disquiet Junto at:

http://soundcloud.com/groups/disquiet-junto/

Subscribe to project announcements here:

http://tinyletter.com/disquiet-junto/

Disquiet Junto general discussion takes place at:

http://disquiet.com/forums

https://hearthis.at/sevenism/crimson-sky-disquiet0232/

more of the same

Crimson Sky (disquiet0232)

a textured noise experiment in no-input mixing. an afternoon in the laboratory, high-voltage lines sizzling, mysterious pipes and beakers bubbling. subsonic rumbles. no audio signals were used.

this is my first-ever venture into no-input recording, per this week's disquiet junto project theme. i was originally planning on doing something with my mackie mixer and strymon effects pedals, a multitracked pitched ambient drone sketch, but...i didn't have enough 1/4" cables. so i figured i could try it with a mixer eurorack module: mutable instruments shades.

i normally mostly use shades to control the amount of modulation sent to clouds. but on its own, once self-patched, shades puts out a surprising amount of extremely low-frequency noise when adjusting knobs, as i saw with a spectrum/eq utility in ableton live. i had an idea: why not excite that activity with a modulator such as tides? i already had the parasite alternative firmware running on tides, so it was just a matter of sending one output of random control voltage into shades, and from there into my audio interface.

the result was seven minutes of hilarious, delightful knob-wiggling, which i then edited down to under three minutes. this track is a sample of the wildly varying textures, drones, static pops, pitched buzz, and burbling gloops obtained with this tiny self-patched rig. just two modules, but so much fun!

recorded for disquiet junto 0232, "no input," and weekly beats 2016 #23.

http://disquiet.com/2016/06/09/disquiet0232/
http://weeklybeats.com

electric waterworks (disquiet0232)

Disquiet Junto Project 0232: No Input
The Assignment: Record a piece of music exploring the concept of “no-input mixing.”

This was the first time I’ve tried “no input” mixing. I was really surprised at the variety and complexity of sounds that came out. Very cool. 

Equipment: Mackie 1202 (I used 2 channels of feedback) and a voltage controlled delay (Ray WIlson design) modulated with a Wogglebug (mostly random step). Edited in Audacity. 

Creative Commons license granted. 

More on this 232nd weekly Disquiet Junto project — “Record a piece of music exploring the concept of ‘no-input mixing.'” — at: http://disquiet.com/0232/

More on the Disquiet Junto at:

http://disquiet.com/junto/

No Input Mixer [disquiet0232]

Disquiet Junto Project 0238: Magnifying Contact
The Assignment: Record a piece of music, emphasizing the sounds of production over the music itself.

Open the case, assemble the instrument, check the reed, wind up the metronome...

Got out my bassoon and recorded the first thing that came out. I wanted to start the piece with the sound of the bassoon fading into a dreamy texture. I captured a few notes and stretched them to make a long A minor drone to go under other sounds.  The minor second (e to f-natural) ended up sounding really dark and mysterious. Layered the notes and faded them in and out using the envelope tool in Audacity. 

I went back and recorded a bunch of key clicks and instrument noises and stretched them a bit to blur the sound. They came out sounding like gasps! Added an intro and ending.

This turned out sounding really different from my original plan but I went with it. A bassoon in need of exorcism. Use headphones for maximum heavy breathing. 

Recorded on a Zoom H5. Edited in Audacity. 

Thanks to carroll27 on Freesound.org for the metronome sound. 

Creative Commons license granted. 

More on this 238th weekly Disquiet Junto project — “Record a piece of music, emphasizing the sounds of production over the music itself” — at:

http://disquiet.com/0238/
More on the Disquiet Junto at:

http://disquiet.com/junto/


The Performance, "Strumento Infestato" for bassoon and processed sounds [disquiet0238]

Black Rain [Gomel 1986]
Submitted to Naviar Records/Clouded Lands Gomel 1986 project.
 
Artillery shells carrying silver iodide explode over Gomel seeding clouds to precipitate radiation from the atmosphere before it drifts towards Moscow. It was described as black rain. Alerts and news bulletins follow. The final voice is Gorbachov's announcement of the disaster. 

You Tube news compilation excerpts were from NewsFromUkraine.  Distant artillery sounds thanks to: Aegersum on Freesound.org.

Black Rain [Gomel 1986]

Naviar Haiku 190, Disquiet 0295
Poisoned Waterhole, for 2 pianos (naviarhaiku190)[disquiet0295]

For Western Riverina Arts and the Crossing Streams project.

Poisoned Waterhole:
Violent disregard echoes.
Keenly felt today.

Poison Waterhole Creek near Narrandera owes its name to a tragic story (one of many) which happened when Europeans claimed the land, 200 years ago. In the 1830s, several groups of Aboriginal families used to camp by the waterhole. Annoyed and eager to get rid of them, the local homestead owner poisoned the waterhole, killing many of them.

Haiku by Peita Vincent https://www.frankandearnest.com.au/our-story. Image by Jason Richardson http://bassling.blogspot.co.uk.

Poisoned Waterhole, for 2 pianos (naviarhaiku190)[disquiet0295]

Disquiet Junto Project 0362: Operational Surrealism
The Assignment: Make a piece of music informed by a key text from the art movement.

The Sewing Machine and the Umbrella for Piano and Percussion disquiet0362

Particles of Me for Mallets and Strings (naviarhaiku270)

snowing
through the blizzard
particles of me

haiku by Alan Summers www.callofthepage.org
picture by Ian Battaglia https://unsplash.com/@ianjbattaglia