The Polysix has a VCF following its Effects section.  The purpose appears to be to reduce the apparent noise of the synth.  A major side-effect is some high-frequency attenuation and a slower attack.  This clip illustrates the sound of: (1) the stock Polysix, (2) defeating the VCF by driving Q14 with +15V, and (3) removing the VCF entirely.  See: http://synthhacker.blogspot.com/2013/07/polysix-bypassing-post-effects-vcf.html

Korg Polysix - Sound of Removing the Post-Effects VCF

Another example comparing the stock Korg Polysix to a modified Polysix where the Post-Effects VCF has been removed.  See: http://synthhacker.blogspot.com/2013/07/polysix-bypassing-post-effects-vcf.html

Second Demo of Removing the Post-Effects VCF (Stock vs Removed)

The Korg Polysix has an LFO ("MG") that I set to affect the VCF.  The Polysix has a "Delay" that can be used to prevent the LFO from affecting the start of each note.  Here my "Delay" is set to zero, but you can still hear that the onset of each note is sweeping in to get itself to the LFO's value.  In stead of this quick sweep, each not should just follow smoothly from the previous. MG Freq = 2, Delay = 0, Amount = 6, VCF Cutoff = 5, Resonance = 0, EG Intensity = 0, KBD Track = 0.  See: http://synthhacker.blogspot.com/2013/08/polysix-mg-delay-of-zero-is-not-zero.html

Korg Polysix - MG On VCF, Delay Of Zero Not Working

The Korg Polysix has an LFO ("MG") that I set to affect the VCF. The Polysix has a "Delay" that can be used to prevent the LFO from affecting the start of each note. Previously, even at a "Delay" of zero, the MG was suppressed at the beginning of each note.  Here, I've swapped out the default R98 (4.7K) for a 10K resistor.  Now, instead of the unexpected transient at the beginning of each note, I get a smooth transition from note to note.  Exactly what I wanted!  Settings: MG Freq = 2, Delay = 0, Amount = 6, VCF Cutoff = 5, Resonance = 0, EG Intensity = 0, KBD Track = 0.

Korg Polysix - Fixed the MG Delay

Here is a comparison of my Korg Polysix with the stock C61 capacitor and with the C61 capacitor bypassed.  I am playing the lowest "C" on the keyboard.  VCF is at "5".  Notice the increased bass response when C61 is bypassed.  For more details, see http://synthhacker.blogspot.com/2013/08/polysix-deeper-bass-bypass-c61.html

Polysix Low "C" With and Without C61

Another example from my Korg Polysix where I compare the unmodified Polysix (with C61) to my modified Polysix (C61 is bypassed).  By removing C61, the bass extends deeper.  You'll need headphones because you won't hear the difference on your laptop speakers.  For more details, go to: http://synthhacker.blogspot.com/2013/08/polysix-deeper-bass-bypass-c61.html

Polysix Arp Bass - With and Without C61

The Korg Polysix has a built-in treble boost on the KLM-368 Effects PCB that was added to overcome treble losses in other parts of the circuit.  My previous modifications removed those treble losses, so my Polysix has a bit too much "sizzle".  Here, I alter the effective resistance around R168 to flatten the built-in treble boost.  After making the recording, I also volume-balanced the two segments.  See http://synthhacker.blogspot.com for more info on the modification.

Polysix - Flatten the Built-In Treble Boost (Arp)

Polysix - Flatten the Built-In Treble Boost (Riffs)

Single-take improv illustrating how my Arduino-based MIDI-to-Trigger can keep my Polysix arpeggiator, my Mono/Poly arpeggiator, and my Kaossilator all in sync with each other.  

For more info, see: http://synthhacker.blogspot.com/.  

Note that I borrowed the "cover art" image from http://www.rumplesharkillustration.com/.  Her work is beautiful.  She maintains all rights to the image.

Dandelion Steps

Single-take improv illustrating how my Arduino-based MIDI-to-Trigger can keep my Mono/Poly arpeggiator (the kick and snare sounds), my Polysix arpeggiator (normal synth arpeggiated sounds), and my Kaossilator (all other sounds) in sync with each other. 

For more info, see: synthhacker.blogspot.com/.

Note that I borrowed the "cover art" image from www.rumplesharkillustration.com/. Her work is beautiful. She maintains all rights to the image.


Dandelion Visions

Audio played back from a tape loop that I recorded on my Portastudio 424.  The erase head was enabled (as is normal).  The loop is about 5 seconds long.  The loop is played 3 times here.  Notice the gap at the end of each loop due to the physical separation of the erase head and the record head.

Portastudio Loop - Erase Head Enabled

Audio played back from a tape loop that I recorded on my Portastudio 424.  The erase head was defeated(I unplugged it).  The loop is about 5 seconds long.  The loop is played 3 times here.  By defeating the erase head, there is no longer any gap at the end of the loop.

Portastudio Loop - Erase Head Defeated

Audio played back from a tape loop that I recorded on my Portastudio 424.  The erase head was enabled (as is normal).  The loop is about 5 seconds long.  The loop is played 3 times here.  The erase head is defeated, so I was able to continue to record a second layer of audio onto the first recording.

synthhacker

Popular tracks